The on-load tap changing (OLTC) regulators have been widely used in various industry. The main function of OLTC is to change the turns of transformer winding, so that the voltage variations are limited without interrupting the secondary current. In other word the voltage can be regulated with the changer without any supply interruption using ANN co...
|
The on-load tap changing (OLTC) regulators have been widely used in various industry. The main function of OLTC is to change the turns of transformer winding, so that the voltage variations are limited without interrupting the secondary current. In other word the voltage can be regulated with the changer without any supply interruption using ANN co...
|
Ultralow-power subthreshold logic circuits are becoming prominent in embedded applications with limited energy budgets. Minimum energy consumption of digital logic circuits can be obtained by operating in the subthreshold regime. However, in this regime process variations can result in up to an order of magnitude variations in ION/IOFF ratios leadi...
|
A novel 8-transistor (8T) static random access memory cell with improved data stability in subthreshold operation is designed. The proposed single-ended with dynamic feedback control 8T static RAM (SRAM) cell enhances the static noise margin (SNM) for ultralow power supply. It achieves write SNM of 1.4× and 1.28× as that of isoarea 6T and read-deco...
|
As the device dimension is shrinking day by day the conventional transistor based CMOS technology encounters serious hindrances due to the physical barriers of the technology such as ultra-thin gate oxides, short channel effects, leakage currents & excessive power dissipation at nano scale regimes. Quantum Dot Cellular Automata is an alternate chal...
|
This letter proposes a novel soft-switched single-stage-isolated dc-ac converter topology from the industry point of view. The proposed converter requires a lesser number of MOSFETs compared to a widely studied cycloconverter-type (CCT)-isolated dc-ac converter topology. This converter provides lower duty cycle loss, better efficiency, and electrom...
|
The Objective of the paper is to control the separately excited dc motor by using the IGBT based chopper. The speed of separately excited dc motor can be control by varying the armature voltage and varying field flux. Thus the speed can be controlled for under rated speed and speed beyond the rated speed, respectively. In this paper, the motor spee...
|
Parasitic inductance reduction is increasingly vital for the SiC power module in high-frequency and high-capacity applications. To address the parasitic issue, the automatic layout design offers the potential to pursue the optimal configuration of the power packaging. However, the efficient and accurate parasitic extraction of the packaging is the ...
|
Planar, double-side cooled power modules are emerging in electric-drive inverters because of their low profile, better heat extraction, and lower package parasitic inductances. However, there is still concern about their reliability due to the rigid interconnection between the device chips and two substrates of the power module. In this paper, a po...
|
This paper presents a comprehensive analysis of non-linear voltage-dependent capacitances of vertical SiC power MOSFETs with lateral channel, focusing specifically on fast switching transients. The capacitance-voltage (C-V) device characteristics, (Cgs, Cgd, Cds), being dependent on both Vgs and Vds, are extracted by means of two-dimensional Techno...
|
The main goal of this project is to implement an auto-intensity control of the LED based street light system that uses solar energy to conserve the electrical power on the streetlight busing Raspberry Pi board. As the traffic decreases slowly in late night hours, the intensity is reduced progressively till morning to save energy, and thus, the stre...
|