Background: The increasing adoption of renewable energy sources like solar and wind presents significant challenges due to their intermittent nature. This variability can strain the power grid, leading to inefficiencies and reliability issues. Traditional grid infrastructure is not designed to handle these fluctuations effectively, resulting in e...
 ABSTRACT This paper deals a detailed study, control and energy management of a solar vehicle Multisource Power Supply. A PVG is used as the principal energy source and the batteries are used as secondary/storage source. The use of this last source can reduce strongly the power stress imposed on the primary source. The power sources (PVG- battery) ...
 Smart Hybrid Electric Vehicles (S-HEV) provide large potential to save fuel consumption and reduce pollutant emission. An S-HEV is a vehicle driven by more than one power source, and usually refers to a combination of internal combustion engine (ICE) and electric motor (EM). ...
 This paper presents the design and implementation of an energy management system (EMS) with fuzzy control for a dc microgrid system. Modeling, analysis, and control of distributed and energy storage devices with MATLAB/Simulink are proposed. To improve the life cycle of the battery, fuzzy control manages the desired state of charge. A fuzzy netwo...
 Internet-of-Things (IoT) devices have a strict necessity for power consumption to achieve the expected battery life. Therefore, measuring and optimizing the energy consumption of IoT nodes are essential. IoT nodes feature extreme current consumption range over 100 dB between their operating modes. The main focus of this article is to design and...
 A number of electric devices in buildings can be considered as important demand response (DR) resources, for instance, the battery energy storage system (BESS) and the heat, ventilation, and air conditioning (HVAC) systems. The conventional model-based DR methods rely on efficient ondemand computing resources. However, the current buildings suffer ...
 A number of electric devices in buildings can be considered as important demand response (DR) resources, for instance, the battery energy storage system (BESS) and the heat, ventilation, and air conditioning (HVAC) systems. The conventional model-based DR methods rely on efficient ondemand computing resources. However, the current buildings suffer ...
 The grid-connected electric vehicle charging stations are being integrated into renewable energy for preserving the conventional energy resources as well as to ensure sustainable development of the society. In addition to the effortless charging, the sudden demand variations in the grid can be met by the renewable energy storage system in the charg...
 Microgrids are emerging as an important constituent of large-scale smart grids. They are equipped with the controls necessary for managing the operation in islanded or grid connected mode and serve the loads with clean, reliable, and uninterruptible power. Microgrid must be equipped with a robust grid synchronization (GS) algorithm so as to allow a...
 The integration of decentralized generation units and the application of demand response programs brings changes to the power systems. Microgrids are emerging with relevant advantages for the power system operation. For this reason, several research projects are currently studding and finding methods to improve microgrids management. The developmen...
 Today's IoT devices rely on batteries, which offer stable energy storage but contain harmful chemicals. Having billions of IoT devices powered by batteries is not sustainable for the future. As an alternative, batteryless devices run on long-lived capacitors charged using energy harvesters. The small energy storage capacity of capacitors results in...
 The rapid development of the Industrial Internet of Things (IIoT) has led to the explosive growth of industrial control data. Cloud computing-based industrial control models cause vast energy consumption. Most existing solutions try to reduce the overall energy consumption by optimizing task scheduling and disregard how to reduce the load of comput...
 Phase sequence exchange (PSE) is a recently developed emergency control technology. PSE uses power electronic devices to switch the three-phase sequence, which reduces the power angle of the generator by 120 and prevents the system from losing stability. In this work, the structure of the PSE device is improved. Based on the original nine solid-sta...
  With the introduction of massive renewable energy sources and storage devices, the traditional process of grid operation must be improved in order to be safe, reliable, fast responsive and cost efficient, and in this regard power flow solvers are indispensable. In this paper, we introduce an Interior Point-based (IP) Multi-Period AC Optimal Pow...
  This paper presents an optimal transient-stability control strategy that modulates the real power injected and absorbed by distributed energy-storage devices. These devices are located at the high-voltage bus of several generators in a synchronous power system. The system is broken into areas based upon groupings of generators. The control stra...
 This paper aims to evaluate the economic performance of a grid-connected system with storage under a dynamic electricity pricing environment with time-of-use (TOU) and feed-in electricity tariffs. The storage can assist in the demand side management as well as to reduce the electricity bill of the consumers. In this case, consumers would purchase e...

We have more than 145000 Documents , PPT and Research Papers

Have a question ?

Chat on WhatsApp